Equipment Specifications Library
Basic Model Information
-
Manufacturer:American Augers
-
Model:DD-50
-
Rig Size:30,001 - 50,000 lbs pullback
View Manufacturers View Models
Specifications
Additional Info
DIMENSIONS
Length: 22 ft 4 in (6807 mm)
Width: 4 ft 6 in (1372 mm)
Height: 7 ft 3 in (2210 mm)
DRILLING UNIT
Maximum Thrust/Pullback: 50,000 lb (222.5 kN)
Maximum Rotary Torque: 6,300 lb-ft (8542.8 Nm)
Maximum Rotary Speed: 0-100 rpm
Downhole Rotary HP: 120 (89.5 kW)
Carriage System: Rack & Pinion
Travel System: Self propelled on steel tracks 15 hp (11.2 kW) diesel engine 12°—19
Drill Angle: 12°—19°
Wrench/Clamp: Open top type
Ground Pressure: 3.6 psi (24.9 kPa)
Weight, Drill Unit: 8,000 lb (3629 kg)
Hold Down Stakes: H-beam type
POWER UNIT
Engine: Caterpillar 3116 DITA diesel 6 cylinder turbocharged aftercooled
Rating: 240 hp (79 kW) continuous duty
Fuel Capacity: 105 U.S. gallons (398 litres)
DRILLING FLUID
Drill Fluid System: 2X600 U.S. gal. (2x2271 lit.)
Flow Rate: 0-135 GPM (0-511 lit/min)
Maximum Pressure: 1,200 psi (83 bar)
Average Drilling Flow: 10 GPM (38 lit/min)
Average Back Ream Flow: 20—40 GPM (76—152 lit/min)
TOTAL DOWN HOLE HP (kW)
Thrust/pullback HP 40 (29.8)
+Rotary HP 120 (89.5)
+Drilling fluid HP 80 (59.7)
=Total Down Hole HP 240 (179)
DRILL PIPE
AA Part Number: 01DT1516
Length: 15 ft (4572 mm)
Outside Diameter: 3-1/2 inch (88.9 mm)
Inside Diameter: 1-3/4 inch (44.45 mm)
Tool Joint O.D.: 4-1/8 inch (104.8 mm) upset
Thread Type: 2-7/8 IF
Make up Torque: 5,000 lb ft (6780 Nm) max.
Weight: 215 1b (98 kg)
TRAILER
Type: Single drop deck, dual axle
Length: 46 ft 5 in (14 147 mm)
Width: 8 ft 00 in (2438 mm)
Shipping Weight: 35,000 lb (15 876 kg)
Brakes: Air
Load Rating: 63,000 lb (28 578 kg) G.V.W.
SKID MOUNT
Length: 23 ft 6 in (7162 mm)
Height: 6 ft 6 in (1980 mm)
Volume: 3000 gal (11350 l)
Length: 22 ft 4 in (6807 mm)
Width: 4 ft 6 in (1372 mm)
Height: 7 ft 3 in (2210 mm)
DRILLING UNIT
Maximum Thrust/Pullback: 50,000 lb (222.5 kN)
Maximum Rotary Torque: 6,300 lb-ft (8542.8 Nm)
Maximum Rotary Speed: 0-100 rpm
Downhole Rotary HP: 120 (89.5 kW)
Carriage System: Rack & Pinion
Travel System: Self propelled on steel tracks 15 hp (11.2 kW) diesel engine 12°—19
Drill Angle: 12°—19°
Wrench/Clamp: Open top type
Ground Pressure: 3.6 psi (24.9 kPa)
Weight, Drill Unit: 8,000 lb (3629 kg)
Hold Down Stakes: H-beam type
POWER UNIT
Engine: Caterpillar 3116 DITA diesel 6 cylinder turbocharged aftercooled
Rating: 240 hp (79 kW) continuous duty
Fuel Capacity: 105 U.S. gallons (398 litres)
DRILLING FLUID
Drill Fluid System: 2X600 U.S. gal. (2x2271 lit.)
Flow Rate: 0-135 GPM (0-511 lit/min)
Maximum Pressure: 1,200 psi (83 bar)
Average Drilling Flow: 10 GPM (38 lit/min)
Average Back Ream Flow: 20—40 GPM (76—152 lit/min)
TOTAL DOWN HOLE HP (kW)
Thrust/pullback HP 40 (29.8)
+Rotary HP 120 (89.5)
+Drilling fluid HP 80 (59.7)
=Total Down Hole HP 240 (179)
DRILL PIPE
AA Part Number: 01DT1516
Length: 15 ft (4572 mm)
Outside Diameter: 3-1/2 inch (88.9 mm)
Inside Diameter: 1-3/4 inch (44.45 mm)
Tool Joint O.D.: 4-1/8 inch (104.8 mm) upset
Thread Type: 2-7/8 IF
Make up Torque: 5,000 lb ft (6780 Nm) max.
Weight: 215 1b (98 kg)
TRAILER
Type: Single drop deck, dual axle
Length: 46 ft 5 in (14 147 mm)
Width: 8 ft 00 in (2438 mm)
Shipping Weight: 35,000 lb (15 876 kg)
Brakes: Air
Load Rating: 63,000 lb (28 578 kg) G.V.W.
SKID MOUNT
Length: 23 ft 6 in (7162 mm)
Height: 6 ft 6 in (1980 mm)
Volume: 3000 gal (11350 l)
This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.