Ang pahinang ito ay isinalin gamit ang Google Translate

Mga pagtutukoy ng kagamitan library

Pangunahing Impormasyon ng Modelo

  • Tagagawa:
    Vermeer
  • Modelo:
    D10x15
  • Laki ng Kalansay:
    0 - 10,000 lbs Pullback

Tingnan ang Mga Tagagawa Tingnan ang Mga Modelo Bumalik sa Listahan

Mga pagtutukoy

Min Bend Radius 29.1 m
Min Bore Diameter 3" 7.6 cm
Manufacturer's Gross HP Rating 50 hp 37.3 kw
Type Forged
Drill Stem 10' 0'' 3m
Joint Diameter 42 mm
Max Carriage Speed 90 ft/min 27.4 m/min
Pipe Diameter 1.66” 4 cm
Fluid Tank 55 gal 208.2 L
Length 10 Ft. 3 m
Max Flow 13.5 gpm 51.1 L/min
Rated Engine RPM 3000 rpm 3000 rpm
Make and Model Perkins
Weight 17 kg
Pullback 10000 lbs 4535.9 kg
Rod Carrying Capacity 440'
Max Spindle Speed 180 rpm 180 rpm
Max Pressure 750 psi 51.7 bar
Ground Drive Speed 1.5 mph 2.4 km/h
Width 35.5'' 91cm
Length 15' 8'' 478 cm
Thrust 10000 lbs 4535.9 kg
Rod Loader yes - optional
Hydraulic Tank Capacity 23 gal 87.1 L
Entry Angle 16 degrees
Pump Pressure 750 psi
Engine Perkins
Pump Output 13.5 gpm
Fuel Tank Capacity 17 gal 64.4 L
Height 86.5'' 219.7 cm
Weight 8980 lbs 4073.3 kg

Karagdagang impormasyon

Oil-well drilling installation
Length: 478 cm
Width: 91 - 124 cm
with linkage change mechanism: 107 - 124 cm
Height (in operating position): 219.7 cm
Operating weight
with linkage box: 3447 kg
with linkage box and
autom. Linkage change-over switch: 3946 kg
hydr. Tightening device: Yes
Driving speed: 2,4 km/h
integrated drill pipes: Yes
autom. Linkage change-over switch: (optionally)
stationary anchoring system: Yes
Work slip thrower: Yes

Operational data
max. Number of revolutions: 180 U/min.
max. Torque: 2031 Nm
effect. Feed motion u. Pull-back power: 4536 kg
electrical. System: 12 V

Suspension system
Option 1:
max. Mechanical handling capacity: 51.10 l/min.
Option 2:
Use of other high pressure suspension plants
possible.

Drive
Engine: Perkins®
Achievement: 50 PS/37 KW
max. Revolutions: 3000 U/min.

Drill pipes
one-piece forged: Yes
Single length: 3 m
Diameter: 42 mm
Bending radius: 29.1 m
Weight: 17 kg

Drilling parameter
min. Hole diameter: 80 mm
The drilling head works with all well-known
Detection systems.
max. Drilling length varies *)
*) Dependent on ground condition,
Hole diameter and weight too
shifting product.

Amount of filling
Hydraulic oil: 87 l
Engine oil inclusive. Filter 8.2 l
Fuel: 64 l

---------------------

DIMENSIONS AND WEIGHTS
Weight: 8980 lbs (4073.3 kg)

ENGINE
Make and Model: Perkins
Maximum Engine RPM: 3000 rpm
Gross Horsepower: 50 hp (37.3 kw)
Net Horsepower: 47 hp (35.1 kw)

OPERATIONAL
Thrust: 10000 lbs (4535.9 kg)
Pullback: 10000 lbs (4535.9 kg)
Maximum Carriage Speed at Maximum Engine RPM: 90 ft/min (27.4 m/min)
Maximum Spindle Speed at Max Engine RPM: 180 rpm
Minimum Bore Diameter: 3 " (7.6 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 1.5 mph (2.4 km/h)
Automated Rod Loader: Yes- optional
Drill Rack Angle: 16 deg

FLUID CAPACITIES
Fuel Tank: 17 gal (64.4 L)
Engine Crankcase with Filter: 8.7 qt (8.2 L)
Hydraulic Tank: 23 gal (87.1 L)
Drilling Fluid System Option One
Maximum Flow: 13.5 gpm (51.1 L/min)
Maximum Pressure: 750 psi (51.7 bar)
On Board Tank Capacity: 55 gal (208.2 L)

FEATURES
Breakout System: Hydraulic - open top
Stakedown System: Yes - stationary

Tingnan ang Mga Tagagawa Tingnan ang Mga Modelo Bumalik sa Listahan

Ang impormasyong ito ay ibinigay para sa mga layuning pang-impormasyon lamang. Ang HDD Broker, Inc. ay hindi maaaring matiyak ang katumpakan o pagkakumpleto ng impormasyong ito. Ang impormasyon na ito ay maaaring magbago sa pamamagitan ng tagagawa. Ang ilang mga pagtutukoy ay maaaring mag-iba sa pamamagitan ng taon ng modelo.

Ang HDD Broker ay gumagamit ng cookies at nagtitipon ng personal na impormasyon sa mga website nito.

Upang matuto nang higit pa, suriin ang Patakaran sa Privacy ng HDD Broker at Patakaran sa Cookie. Sa pamamagitan ng pag-click sa "Tanggapin Ko", ipinapahiwatig mo na inayos mo ang mga setting ng iyong browser upang magkasya ang iyong mga kagustuhan at pahintulot sa paggamit ng HDD Broker ng cookies.

x