Ang pahinang ito ay isinalin gamit ang Google Translate
Mga pagtutukoy ng kagamitan library
Pangunahing Impormasyon ng Modelo
-
Tagagawa:Vermeer
-
Modelo:Flextrak 75
Tingnan ang Mga Tagagawa Tingnan ang Mga Modelo Bumalik sa Listahan
Mga pagtutukoy
Karagdagang impormasyon
GENERAL
Weight (power unit only): 8700 lbs. (3946.3 kg)
Length: 99.1" (251.7 cm)
Width: 68.7" (174.5 cm)
Height: 107.8" (273.8 cm) 2-post ROPS
Wheel Base: 69.9" (177.5 cm)
Undercarriage:
*Track Frame: Oscillating, reinforced box section
*Track rollers/idler: Sealed and lubricated , 17.7" (45 cm) wide single grouser shoes
*Tension: Grease cylinder and spring
Ground Clearance: 11.3" (28.7 cm) (front axle), 5" (12.7 cm) (drive motors)
Ground Pressure (tractor only): 3.6 psi (.25 bar) 2-post ROPS
ENGINE
Model: John Deere 3179T turbocharged Diesel (rubber-mounted)
Number of Cylinders: 3
Displacement: 179 cu. in. (2934 cc)
Rated Gross HP: 79 hp (59 kw) at 2500 rpm
Rated Torque: 175 ft.-lbs. (237.3 Newton-meters) @ 2200 rpm
Maximum Torque: 192 ft.-lbs. (260.4 Newton-meters) @ 1500 rpm
Fuel Tank Capacity: 32 gal. (121.1 L)
Fuel Consumption (full load): 4.05 gal./hr. (15.3 L/hr.)
Cooling Medium: Liquid
Air Cleaner: Dry type with restriction indicator
Electrical System: 12 V DC
Maximum Operating Angle: Fore/Aft 30° - Sideways 30°
STEERING
Electric steering wheel control of dual ground drive pumps. Counter rotation possible through full speed range.
HYDRAULIC SYSTEM
Ground Drive: Dual path, closed loop hydrostatic with hot oil shuttle valves. Infinitely variable speed with electric foot pedal control (forward and reverse).
Travel Speeds:
*7.8 mph (12.5 km/hr) high forward and reverse (optional)
*3.9 mph (6.3 km/hr) low forward and reverse (standard)
Service Brake: Hydrostatic
Park Brake: Spring-applied, hydraulic-released
Pressure Filtration: Exceeds 10 Micron
Auxiliary System: Closed loop hydrostatic with hot oil shuttle valves. Infinitely variable speed with manual control.
Oil Tank Capacity: 32 gal. (121 L)
Oil Type: Mobil DTET6 or equivalent
Oil Cooler: Radiator-type 2.4 square feet area
Suction Screens: (4) 200 mesh with magnetic traps
Oil Return Filter: 10 Micron with 25 psi (1.7 bar) bypass
V-8000 BACKFILL BLADE
Weight: 645 lbs. (293 kg)
Width: 80" (203 cm)
Height: 16" (41 cm)
Lift Above Ground: 18" (46 cm)
Type: Hydraulic lift - tilt - angle
Angle of Approach: 22°
Max. Swing Angle: 30° right/left
V-7800 BACKHOE
Weight, less Bucket: 1480 lbs. (671 kg)
Digging Depth: 94-6" (240 cm)
Controls: Center mount
Digging Force: 4700 lbs. max. (2132 kg)
V9300 BACKHOE
Weight, less Bucket: 1850 lbs. (839 kg)
Digging Depth: 112" (284.5 cm)
Controls: Center mount
Digging Force: 6350 lbs. max. (2880 kg)
FLEX PLOW
Height: 107.5" (273.1 cm)
Weight, less Blade: 2350 lbs. (1066 kg)
Length: 129.5" (328.9 cm)
Drive: Hydrostatic with fixed displacement motor
Plow Cover Depth: 24"-36" (61-91.4 cm)
Plow Swing: 44" (0-111.8 cm) each side of center
RC-3000 REEL CARRIER
Max. Reel Diameter: 96" (244 cm)
Max. Reel Width: 54" (137 cm)
Max. Reel Weight: 3000 lbs. (1360 kg)
FH-1050 TRENCHER
Weight: 2800 lbs. (1270 kg)
Drive: Hydrostatic with fixed displacement motor
Digging Depth: 0"-60" (0-152 cm)
Digging Width: 6" to 12" max. (15 to 30.5 cm)
End Idler: 10" or 20" (25 or 51 cm)
Cutters: Cup or Rotary
Chain: K or M Style, 110,000-lb. tensile strength (49,930 kg)
Boom Swing Angle: ±10°
Weight (power unit only): 8700 lbs. (3946.3 kg)
Length: 99.1" (251.7 cm)
Width: 68.7" (174.5 cm)
Height: 107.8" (273.8 cm) 2-post ROPS
Wheel Base: 69.9" (177.5 cm)
Undercarriage:
*Track Frame: Oscillating, reinforced box section
*Track rollers/idler: Sealed and lubricated , 17.7" (45 cm) wide single grouser shoes
*Tension: Grease cylinder and spring
Ground Clearance: 11.3" (28.7 cm) (front axle), 5" (12.7 cm) (drive motors)
Ground Pressure (tractor only): 3.6 psi (.25 bar) 2-post ROPS
ENGINE
Model: John Deere 3179T turbocharged Diesel (rubber-mounted)
Number of Cylinders: 3
Displacement: 179 cu. in. (2934 cc)
Rated Gross HP: 79 hp (59 kw) at 2500 rpm
Rated Torque: 175 ft.-lbs. (237.3 Newton-meters) @ 2200 rpm
Maximum Torque: 192 ft.-lbs. (260.4 Newton-meters) @ 1500 rpm
Fuel Tank Capacity: 32 gal. (121.1 L)
Fuel Consumption (full load): 4.05 gal./hr. (15.3 L/hr.)
Cooling Medium: Liquid
Air Cleaner: Dry type with restriction indicator
Electrical System: 12 V DC
Maximum Operating Angle: Fore/Aft 30° - Sideways 30°
STEERING
Electric steering wheel control of dual ground drive pumps. Counter rotation possible through full speed range.
HYDRAULIC SYSTEM
Ground Drive: Dual path, closed loop hydrostatic with hot oil shuttle valves. Infinitely variable speed with electric foot pedal control (forward and reverse).
Travel Speeds:
*7.8 mph (12.5 km/hr) high forward and reverse (optional)
*3.9 mph (6.3 km/hr) low forward and reverse (standard)
Service Brake: Hydrostatic
Park Brake: Spring-applied, hydraulic-released
Pressure Filtration: Exceeds 10 Micron
Auxiliary System: Closed loop hydrostatic with hot oil shuttle valves. Infinitely variable speed with manual control.
Oil Tank Capacity: 32 gal. (121 L)
Oil Type: Mobil DTET6 or equivalent
Oil Cooler: Radiator-type 2.4 square feet area
Suction Screens: (4) 200 mesh with magnetic traps
Oil Return Filter: 10 Micron with 25 psi (1.7 bar) bypass
V-8000 BACKFILL BLADE
Weight: 645 lbs. (293 kg)
Width: 80" (203 cm)
Height: 16" (41 cm)
Lift Above Ground: 18" (46 cm)
Type: Hydraulic lift - tilt - angle
Angle of Approach: 22°
Max. Swing Angle: 30° right/left
V-7800 BACKHOE
Weight, less Bucket: 1480 lbs. (671 kg)
Digging Depth: 94-6" (240 cm)
Controls: Center mount
Digging Force: 4700 lbs. max. (2132 kg)
V9300 BACKHOE
Weight, less Bucket: 1850 lbs. (839 kg)
Digging Depth: 112" (284.5 cm)
Controls: Center mount
Digging Force: 6350 lbs. max. (2880 kg)
FLEX PLOW
Height: 107.5" (273.1 cm)
Weight, less Blade: 2350 lbs. (1066 kg)
Length: 129.5" (328.9 cm)
Drive: Hydrostatic with fixed displacement motor
Plow Cover Depth: 24"-36" (61-91.4 cm)
Plow Swing: 44" (0-111.8 cm) each side of center
RC-3000 REEL CARRIER
Max. Reel Diameter: 96" (244 cm)
Max. Reel Width: 54" (137 cm)
Max. Reel Weight: 3000 lbs. (1360 kg)
FH-1050 TRENCHER
Weight: 2800 lbs. (1270 kg)
Drive: Hydrostatic with fixed displacement motor
Digging Depth: 0"-60" (0-152 cm)
Digging Width: 6" to 12" max. (15 to 30.5 cm)
End Idler: 10" or 20" (25 or 51 cm)
Cutters: Cup or Rotary
Chain: K or M Style, 110,000-lb. tensile strength (49,930 kg)
Boom Swing Angle: ±10°
Tingnan ang Mga Tagagawa Tingnan ang Mga Modelo Bumalik sa Listahan
Ang impormasyong ito ay ibinigay para sa mga layuning pang-impormasyon lamang. Ang HDD Broker, Inc. ay hindi maaaring matiyak ang katumpakan o pagkakumpleto ng impormasyong ito. Ang impormasyon na ito ay maaaring magbago sa pamamagitan ng tagagawa. Ang ilang mga pagtutukoy ay maaaring mag-iba sa pamamagitan ng taon ng modelo.