Ang pahinang ito ay isinalin gamit ang Google Translate
Mga pagtutukoy ng kagamitan library
Pangunahing Impormasyon ng Modelo
-
Tagagawa:Vermeer
-
Modelo:D75x100
-
Laki ng Kalansay:50,001 - 100,000 lbs pullback
Tingnan ang Mga Tagagawa Tingnan ang Mga Modelo
Mga pagtutukoy
Karagdagang impormasyon
-*2003*-
GENERAL
Length: 358" (909 cm)
Width: 93" (236 cm)
Height: 121" (307 cm)
Weight: 36,500 lb (16,556 kg)
Breakout System: Yes
Stakedown System: Yes - 4 position
Drilling Lights: Yes
OPERATIONAL
Spindle torque (stall):
-10,000 ft-lbs. (13,588 Nm) @ 80 rpm
-7600 ft-lbs. (10,304 Nm) @ 110 rpm
-5100 ft-lbs (6914 Nm) @ 160 rpm
Actual pullback: 75,000 lbs (34,948 kg)
Actual thrust: 43,500 lbs, (19,688 kg)
Maximum spindle speed: 160 rpm
Maximum carriage speed: 68/136 ft./min (20/41 m/min)
Minimum bore diameter: 5" (12.7 cm)
Automated Rod Loader: Yes
Maximum Ground Drive Speed: 2.6 mph (4.2 km/h)
Drill Rack Angle: 26-37%
Remote Lockout: Standard
WATER SYSTEM
Maximum Flow: 15 gpm (568 L/min)
Maximum Pressure: 900 psi (62 bar)
Flow Indicator: Yes
DRILL STEM
Type: Firestick II
Length: 15' (4.57 m)
Joint diameter: 4" (10 cm)
Pipe diameter: 3" (7 cm)
Weight: 200 lb/stem (91 kg/stem)
% Pitch/Stem: 8.7%
Clip weight:
-5600 lb (2540 kg) - 24 rod
-3000 lb (1360 kg) - 12 rod
Rod carrying capacity: 360' (110 m)
POWER SOURCE
Engine: John Deere
Gross power rating: 185 hp (138 kw)
Net power rating: 167 (124 kw)
Rated. RPM: 2400 rpm
FLUID CAPACITIES
Hydraulic reservoir: 60 gal. (227 L)
Engine oil (including filter): 20 qt (19 L)
Fuel tank: 60 gal. (227 L)
The Vermeer D75x100 with rack-and-pinion drive system is designed to provide high performance on a wide range of mid-to large-size horizontal directional drilling projects. Featuring 10,000 ft-lb (13,588 Nm) of rotational torque, the self-contained D75x100 brings large power to the job site in a relatively small self contained HDD package.
The D75x100 is standard with a 150 gpm (568 L/min) on board drilling fluid pump with flow indicator and pump monitoring system. The Rockfire Ready System is a standard feature which allows operation of the Rockfire pneumatic rock drilling system. The Rockfire Ready System is also beneficial in everyday drilling providing such features as a built in pump bypass, adjustable thrust control and reverse rotation pressure limiter.
The D75x100 is available with the contractors choice of 15' section of Firestick I or Firestick II drill stem.
The state-of-the-art operator's station was designed to help the operator remain comfortable during longer bores. The unique station is elevated with an electrically operated swivel
and tilt control seat. There are toggle switches for breakout system, fluid pump, radio and throttle integrated into thrust and rotation levers.
The D75x100 rack-and-pinion carriage drive is simple and provides smooth and powerful operation. The gear track is sectionalized and bolts on for easy maintenance.
GENERAL
Length: 358" (909 cm)
Width: 93" (236 cm)
Height: 121" (307 cm)
Weight: 36,500 lb (16,556 kg)
Breakout System: Yes
Stakedown System: Yes - 4 position
Drilling Lights: Yes
OPERATIONAL
Spindle torque (stall):
-10,000 ft-lbs. (13,588 Nm) @ 80 rpm
-7600 ft-lbs. (10,304 Nm) @ 110 rpm
-5100 ft-lbs (6914 Nm) @ 160 rpm
Actual pullback: 75,000 lbs (34,948 kg)
Actual thrust: 43,500 lbs, (19,688 kg)
Maximum spindle speed: 160 rpm
Maximum carriage speed: 68/136 ft./min (20/41 m/min)
Minimum bore diameter: 5" (12.7 cm)
Automated Rod Loader: Yes
Maximum Ground Drive Speed: 2.6 mph (4.2 km/h)
Drill Rack Angle: 26-37%
Remote Lockout: Standard
WATER SYSTEM
Maximum Flow: 15 gpm (568 L/min)
Maximum Pressure: 900 psi (62 bar)
Flow Indicator: Yes
DRILL STEM
Type: Firestick II
Length: 15' (4.57 m)
Joint diameter: 4" (10 cm)
Pipe diameter: 3" (7 cm)
Weight: 200 lb/stem (91 kg/stem)
% Pitch/Stem: 8.7%
Clip weight:
-5600 lb (2540 kg) - 24 rod
-3000 lb (1360 kg) - 12 rod
Rod carrying capacity: 360' (110 m)
POWER SOURCE
Engine: John Deere
Gross power rating: 185 hp (138 kw)
Net power rating: 167 (124 kw)
Rated. RPM: 2400 rpm
FLUID CAPACITIES
Hydraulic reservoir: 60 gal. (227 L)
Engine oil (including filter): 20 qt (19 L)
Fuel tank: 60 gal. (227 L)
The Vermeer D75x100 with rack-and-pinion drive system is designed to provide high performance on a wide range of mid-to large-size horizontal directional drilling projects. Featuring 10,000 ft-lb (13,588 Nm) of rotational torque, the self-contained D75x100 brings large power to the job site in a relatively small self contained HDD package.
The D75x100 is standard with a 150 gpm (568 L/min) on board drilling fluid pump with flow indicator and pump monitoring system. The Rockfire Ready System is a standard feature which allows operation of the Rockfire pneumatic rock drilling system. The Rockfire Ready System is also beneficial in everyday drilling providing such features as a built in pump bypass, adjustable thrust control and reverse rotation pressure limiter.
The D75x100 is available with the contractors choice of 15' section of Firestick I or Firestick II drill stem.
The state-of-the-art operator's station was designed to help the operator remain comfortable during longer bores. The unique station is elevated with an electrically operated swivel
and tilt control seat. There are toggle switches for breakout system, fluid pump, radio and throttle integrated into thrust and rotation levers.
The D75x100 rack-and-pinion carriage drive is simple and provides smooth and powerful operation. The gear track is sectionalized and bolts on for easy maintenance.
Ang impormasyong ito ay ibinigay para sa mga layuning pang-impormasyon lamang. Ang HDD Broker, Inc. ay hindi maaaring matiyak ang katumpakan o pagkakumpleto ng impormasyong ito. Ang impormasyon na ito ay maaaring magbago sa pamamagitan ng tagagawa. Ang ilang mga pagtutukoy ay maaaring mag-iba sa pamamagitan ng taon ng modelo.